Toilet Repair & Installation in Etobicoke, Toronto — Fast Service for Condos, Townhomes & Heritage Homes

What are the most common toilet problems in Etobicoke homes?

Etobicoke's diverse housing stock produces three distinct failure patterns. In Humber Bay Shores condos, toilet fill valves and flappers clog with mineral deposits — Toronto's water at 18–25 grains per gallon (gpg) leaves scale on internal components. In Rexdale 1990s townhomes, Poly-B supply lines to toilets are a failure point: the plastic supply hose and the ball valve on the shutoff both degrade and leak. In The Kingsway heritage homes, 1930s-era toilets with tank-to-bowl connectors are still sometimes in service — these crack from age and vibration.

Why does my Etobicoke toilet keep running?

A constantly running toilet wastes 200 litres of water per day and typically traces to a worn flapper, a misadjusted float, or a corroded fill valve. In Humber Bay condos, mineral buildup prevents the flapper from seating properly. Replacing the fill valve and flapper costs $158–$220 and eliminates the waste. We carry parts on the van for same-day repair.

When should I replace a toilet instead of repairing it?

Toilets over 25 years old using 13 litres per flush (pre-1996 models) should be replaced with a modern dual-flush model (4.8L/6L). The water savings pay back the installation cost in 3–5 years. We recommend TOTO and Kohler for reliability in hard-water conditions — their larger flush valves resist mineral clogging better than budget models.

Toilet installation in Etobicoke's three main housing types each has specific requirements:

Humber Bay Shores condos: Condo rules typically require shutting off the unit's water supply — we coordinate with your property manager if a building-wide shutoff is needed. Floor protection is standard. Installation takes 1.5–2 hours. A permit is required for any rough-in changes.

Rexdale and Etobicoke townhomes: We inspect the shut-off valve condition before removal — 1990s ball valves often seize and need replacement during toilet work. Floor flanges are sometimes corroded in older townhomes.

Kingsway detached homes: Older rough-in distances (14 or 10 inches vs. standard 12) are common in pre-1960 homes. We measure and confirm before you purchase a toilet — buying the wrong rough-in is a common homeowner mistake.

Etobicoke pricing runs approximately 5% above base Toronto rates.

Service	Cost Range (CAD)
Flapper and fill valve replacement	$158–$220
Full toilet repair (multiple components)	$220–$370
Standard toilet installation (supply-only)	$210–$365
Premium toilet installation (client-supplied)	$185–$310
Toilet rough-in and installation	$525–$1,050
Emergency toilet repair (same-day)	$290–$420

Most Etobicoke repairs are completed in a single visit. Condo work may require scheduling building management access in advance.